With the development of social production and construction, the production volume of welding machine parts will continuously increasing, especially the welding rotator, which can improve the welding quality and production efficiency. Popularly applicable in 9 fields of rail transportation equipment, high-end ship and marine engineering equipment, smart cars, contemporary agricultural machinery, high-end medical equipment and pharmaceuticals, new materials, intelligent manufacturing operations, and serious technical equipment. There are many types of welding roller frames, so it includes a lot of knowledge. It is not enough to introduce it within one article.
1. Before starting the pipe turning roll, we need to strictly adjust speed button according to specific job requirements in order to avoid a large starting current. Please adjust the speed of pipe turning roll to the lowest speed position, and then once start the engine, adjust the speed to the appropriate position according to the actual operating requirements, so as to not only ensure a very correct running speed, but also ensure a good welding effect.
2. Before beginning the engine and during the operation of the welding rotator, it should be ensured that it does not have any vibration and noise. If such a failure occurs, it needs to be discharged in time and effectively. If the workpiece is lifted on the roller frame, we must first observe the position of the workpiece, followed by whether the workpiece is completely attached to the turning roller, and whether the workpiece has obstructions, etc.
3. Before starting the motor of the welding roller frame, check the wiring in detail to ensure that it is on the right connection before closing the power switch to start the motor. The Fengwei Machinery will always help to guide and check the rotation and the required direction before delivering. We turn on the debugging switch, adjust the speed control knob from small to large, and adjusts it to the speed for quality check.
4. Before operating the welding rotator, the priority is to inject the appropriate amounts of lubricating oil into these mechanical parts of machine, and develop a regular check whether the amount of lubricating oil in each turbine box and bearing is appropriate and sufficient. If it is not suitable, you need to add lubricating oil on time. Professional roller frame manufacturers will recommend to choose professional grease, and regularly keep maintenance such as replacing the grease.
5. The automatic adjustment welding rotator can automatically adjust the center distance of the rollers to meet the different diameter of workpieces and is easy to use. The bottom of the base of the roller stand is provided with a steel rail positioning groove, which is convenient for the centering of the master and slave roller stands and convenient for placement. A mobile wheel set can be installed under the bottom plate of the roller stand base to form a mobile structure. The weight of the workpiece during the operation process should be strictly within the load design, so that it can effectively avoid the maximum distance of the main and auxiliary wheels to a certain extent.
Here Fengwei Machinery would like to inform you that if the workpiece needs to be changed in the direction of rotation, remember to stop the motor first before pressing the reverse button, otherwise it will cause the motor or other components to be burned. When the whole working process is over, the speed control knob needs to be adjusted to small, and then turn off the speed control switch as well as turn off the main power.