The material type and the cleaning method of roller in welding turning-roll

Welding turning roller is usually used in the welding works, and its main component is a roller, which has a variety of materials. The common ones are polyurethane roller and metal-rubber mixed roller. The users can choose to buy according to their own needs, but before it should be clear about what is different between them.

The polyurethane roller used in the welding roller frame is made of organic polymer polyurethane castable, which not only has good oil resistance, toughness, abrasion resistance and aging resistance, but also has properties such as tensile strength, tear strength and abrasion resistance which are much higher than ordinary rubber type.

The metal-rubber mixed roller is characterized by large loading capacity and long life service of the rubber wheel, because its main drive worm uses ZC circular-arc cylindrical worm, whose surface has been treated through quenching, grinding and etc.

When welding turning-roll is in the process of working, it is easy to be stuck by dirt, especially on its roller, therefore frequent cleaning on tank turning rolls are necessary. Importantly, the supporting wheels and other disassembled parts of the welding turning-roll must be removed before cleaning.

Here is the cleaning process for used welding rotator. Put the disassembled parts in the container, add professional cleaning agent and water in a proportion of 1:5, and carry out simple cleaning, pay attention that the soaking time should not be too long. Then use a clean cloth to dip in the 1:5 mixed cleaning agent to the entire roller frame for cleaning and removing surface stains. Wait until all parts of the welding roller rack are cleaned, dry it with a dry cloth, and then pour the original factory special maintenance agent to wipe the roller frame surface. Finally install all the disassembled parts and assemble them to the original.

Once welding turning-roll is used for operation, proper maintenance is recommended. It is not only to extend the machine’s work life, but also ensure the safe operation in the next work shift. What is the proper process to hold a pipe roller’s maintenance? Firstly, check the external environment of the welding turning-roll to see whether it meets the requirements and make sure there is no sundries interference. Then leave it to run empty while on power. Normal equipment should be free from abnormal noise, vibration, and smell.

When it is necessary to place the workpiece on the welding turning-roll, the diameter and weight of the workpiece should meet the design requirements, otherwise it is easy to cause safety accidents. More significantly, it is necessary to adjust the distance of the welding turning-roll according to the length of the equipment.

Choose the best, choose Fengwei.

For more information about the welding turning-roll and welding positioner, please follow the website of wuxi fengwei mechanical equipment co., LTD. (www.wxfengwei.com).